Solutions to damp solid wood floor

2022-07-22
  • Detail

Solid wood flooring is made of natural wood, which has many advantages, such as moisture insulation, sound insulation, heat preservation and warming, warm in winter and cool in summer, strong elasticity, comfortable foot feeling, etc. many families use solid wood flooring more and more in decoration. Nowadays, most consumers have realized the outstanding advantages of solid wood flooring in a variety of living room floor materials, but they lack some professional knowledge about the common protection of solid wood flooring. For solving the problems of moisture absorption expansion and deformation of solid wood floors, the following three treatment methods are listed here:

1. Ground moisture-proof treatment method: generally “ Three layers of asphalt and two layers of felt (three layers of asphalt, two layers of felt paper, and then a layer of cement on it to prevent the release of harmful gases); The simple treatment method is to lay a layer of moisture-proof film

2. Balance the expansion of plates through installation: some add a layer of rough floor on the keel, some installation requirements leave a 0.2mm wide gap between plates, some requirements leave a trap at the four corners of the room to facilitate moisture release, some requirements set springs in the expansion joints of the wall floor, some use aluminum alloy keel, some use the installation method of track type wood floor, etc

3. Moisture proof treatment method of the plate: the tongue and groove of the back plate is painted, waxed, coated with aluminum platinum, plastic and nanotechnology

when the solid wood floor is found to be damp, the floor around the room should be lifted immediately to dissipate the moisture, which can alleviate the degree of deformation. If the damp area is large and the deformation degree is large, it is recommended to reorganize the base course and pave the floor again after drying

I. the edge of the solid wood floor is warped

the horizontal sides of the solid wood floor are warped upward to form “ Concave, which is commonly known as floor warping. The main reason for the warping of solid wood floor is that the board is affected by moisture. The direct reasons for the warping of solid wood floor include:

(1) the water content of building walls and floors is high

(2) the ground is not completely dry during the paving process

(3) the moisture-proof isolation measures are not in place, and the invasion of moisture on the floor is not completely blocked

(4) condensate caused by indoor temperature difference, including underground pipelines and geothermal pipelines

(5) the long bone itself is not completely dried wood

(6) artificial water during floor cleaning

therefore, before paving, we should try to ensure that the ground and other auxiliary substrates are dry, especially the moisture-proof isolation measures should be in place, and the moisture-proof isolation layer should ensure the overall sealing

solution: when the solid wood floor is found to be damp, the floor around the room should be lifted immediately to dissipate the moisture, which can alleviate the degree of deformation. If the damp area is large and the deformation degree is large, it is recommended to reorganize the base course and pave the floor again after drying

read more: 1 ・ 2 ・ next page >& gt;

重庆妇科医院

武妇科医院

苏州皮肤病医院

南京胎记医院

Copyright © 2011 JIN SHI